To see the full range of our products, including glazing bars, sheets and structural supports, you can create a Trade or Architect account. Our Kitsets can be purchased without creating an account. For customised options please contact email@example.com.
What is the difference between ClearSpan Bar and Box, and the EconoGlaze systems?
The ClearSpan Box system includes an Aluminium rafter for greater structural support and a more modern, cleaner finish. The ClearSpan Bar system can sit on top of timber or metal rafters or purlins. Its sleek design allows for the top screw to be hidden. The EconoGlaze system is a simplified version of the ClearSpan Bar and designed to sit on 50mm rafters.
What is included in the Glazing Systems?
The ClearSpan Bar and Box includes all rubbers, fixing screws and 2 end plates with screws per Bar/Box.
The EconoGlaze Bar includes all rubbers and 2 end plates with screws per Bar. Additional fixing screws can be purchased.
For each system, you would require 2 Edge Spacers for a square/rectangular structure to fill in the ends where the sheet would go.
What lengths do the Glazing Systems come in?
4050mm and 6050mm. These can be easily cut to suit any lengths within these dimensions.
What colour glazing sheet should I use?
Clear and Grey are both transparent, Diffused Opal is translucent. Clear will allow the most heat and light transmission, while Grey will allow the least amount of heat. Diffused Opal will allow plenty of light to come in, and reflect the heat away. Transmission numbers below:
• Clear – 91% Light Transmission and 73.5% Heat Transmission
• Grey – 60% Light Transmission and 69.7% Heat Transmission
• Opal – 75% Light Transmission and 57.8% Heat Transmission
Can the Glazing Systems be powder coated?
What can the Glazing systems be used for?
Structural Glazing including roofs and walls for any residential or commercial purpose including:
• Canopies, Awnings
• Factories and Warehouses
• Outdoor living areas
• Covered walkways
• Pool covers
• Patio covers for restaurants or cafes
• Hotel Atriums
• Shopping Centres
How far can the Glazing Systems span?
This all depends on the thickness of the sheet, building on rafters or purlins, and wind zones. Span charts for each glazing system can be found on our technichal page.
Do you have components for structural support?
Yes we can supply a range of rafters, posts and brackets to cover most designs. If we don't stock it, we may be able to design it.
Can you provide designs or PS1 for my structure?
Yes this can be done for an additional fee.
Can you quote for supply and install?
Yes we can provide estimates if we have design plans. We can also recommend builders in your area who may be able to provide a site visit and measure.
What is the warranty on the Glazing System?