Econoglaze
The Econoglaze system can be mounted directly onto timber, aluminium or steel supporting members such as rafters or purlins. Econoglaze is an economical option for shorter spans or smaller structures. Econoglaze is well suited to new builds, or retrofitting onto an existing structure.
Available in 4050mm and 6050mm lengths and can be cut to size.
| Features and Benefits |
|---|
| Engineered in NZ for NZ conditions |
| 50mm wide, ideal to sit on 50mm Aluminium |
| Fully customisable |
| Easy to Install |
| 99% UV protection |
| Can suit Solid Polycarbonate, Acrylic or Glass |
| Powder coated to suit the existing building and walls |
| Applications |
|---|
| Pergolas, Canopies and Awnings |
| Restaurant and Café Patios |
| Outdoor living areas |
| Covered walkways |
| Carports |
| Restaurant and Café Patios |
| Structural glazing including roofs |
| Complementary Products |
|---|
| Polycarbonate Panels |
| Edge Spacers |
| End plates and caps |
| Downloads |
|---|
| Econoglaze Brochure |
| Econoglaze Span charts |
| Econoglaze Installation Instructions |
| DXF Files |
| Renders |
| Case Study |
Frequently Asked Questions
What are the advantages of using the Econoglaze system?
The Econoglaze system is ideal for existing or intended timber structures, shorter spans and a more economical option to the Clearspan Bar system. It is 50mm wide so better suited for aluminium or steel rafters. As it is a simple 2 piece, click together system, it is cheaper than the Clearspan Bar. However, you will see the top screw through the entire system at the top. Please note this screw is not supplied.
How far can I span the Econoglaze system?
This depends on your wind zone. With purlin support, you can span up to 1.3m between purlins. If you do not want purlins, the span lengths depend on wind zone and timber rafter size. Please see guide below. For additional span information on Aluminium or steel rafters, please contact us.
